Details
Victron Energy VE.Can Resistive Tank Sender Adapter Level Monitoring EAN 8719076021391
The Victron Energy VE.Can resistive tank sender adapter is a vital interface for seamlessly connecting a standard resistive tank level sensor to a Color Control GX or other GX devices. This advanced adapter provides precise tank monitoring for fuel, fresh water, waste water, oil, or black water, ensuring you always have accurate data on your vessel or industrial system.
Features and configuration Compatible with both European (0-180 Ohm) and American (240-30 Ohm) standards, the adapter achieves an accuracy of +/- 1 percent. Two rotary switches make it simple to configure the unit for any tank type. The system is highly scalable, supporting up to 16 tanks of each type within a single network. Its rugged IP67-rated enclosure makes the device fully dustproof and waterproof.
Key benefits and specifications
-
Seamless integration of analog sensors into the digital VE.Can network.
-
Supports up to 16 tanks per type for extensive system monitoring.
-
Powered directly via VE.Can (or via a dedicated VE.Can power cable if CAN-bus power is unavailable).
-
Low power consumption of less than 50mA and a wide input voltage range (9-70V DC).
Installation and usage instructions Mount the tank adapter near the tank. Wire your resistive sensor to the adapter and use the rotary switches to set the liquid type and resistance standard. Connect the adapter to your VE.Can network. If power is not provided by the network, use a specific VE.Can power cable. The system automatically detects the sensor on your GX display, allowing you to monitor tank levels instantly.